Setup

Use HEAVY PRESSURE! It should be hard to close your press! Set heat press to the correct temperature. Keep in mind that every press is different. 270° for 100% Polyester, 300° for most cottons and blends

Pressing

Pre-press garment for 5 to 7 seconds. Line up your transfer on the garment. Press for 10 - 15 seconds. These are Hot Peel Film Transfers, you can instant peel, or wait a few seconds to peel. Once transfer has cooled, remove the film slowly. If the transfer is not adhering, check your pressure and press again. Cover the design with parchment paper, a plain t-shirt, or Teflon and repress for another 7 to 10 seconds.

How To Care For DTF

How to Care for Your Shirts with DTF?
Direct to Film transfers hold up extremely well when pressed and washed properly.
Do not wash or dry on high heat. Low or Medium heat is fine.
Do not use Fabric Softener! Using Fabric Softener will cause the transfer to crack.
*Every heat press is different, it’s best to check your heat press with a heat gun to ensure you have accurate temperature.*
*We are not responsible for incorrect pressing.*